Description
Aspire 500 solar street light
The Aspire 500 is a road class solar street light for car parks, roadways and intersections, built to AS/NZS 1158 Category V. A 500 Wp monocrystalline panel and in pole LiFePO4 storage power the Aspire luminaire at 45 W to 75 W, programmed to suit each project and delivering up to 8,545 lumens all night.
Two to five 48 Ah battery modules sit secured inside the pole, from 2,458 Wh to 6,144 Wh, with up to four on a 6 m pole. On slip base roadway poles the batteries are installed above the vehicle impact zone, and the dual battery management system switches off automatically in an impact.
Tapered hot dip galvanised poles come in 6 m, 9 m and 10.5 m, on fixed or slip base foundations. Advanced Power Scaling (APS) holds a set brightness through the night and trims output only if the battery will not last until morning, giving an estimated 4 to 8+ nights of autonomy.
LEDiL T3 optics are standard, with T2 and T5 square available, in 4000K, 3000K or 590 nm turtle friendly. For higher output, a RoadLED Midi luminaire can be fitted for up to 150 W. Each system carries a 5 year complete unit warranty.
Key Features
Road class output. 45 W, 60 W or 75 W (5,743 / 7,228 / 8,545 lm) to AS/NZS 1158 Category V, or up to 150 W with a RoadLED Midi.
500 Wp solar capture. A single monocrystalline panel with stainless steel bird guards and optional panel guards.
Secure in pole storage. Two to five 48 Ah LiFePO4 modules of 1,229 Wh inside the pole, with dual padlock plate and door locks, rated for 4,000 to 6,000 cycles.
Built for roadways. Slip base poles keep the batteries above the impact zone, and the dual BMS shuts down automatically in a collision.
Poles from 6 m to 10.5 m. Hot dip galvanised tapered steel; 6 m fixed base, 9 m fixed or slip base, 10.5 m slip base with a 4.5 m arm.
Luminaire options. The Aspire LED luminaire as standard, or a Sylvania RoadLED Midi (60 W to 150 W, Category V tested) to suit the project.
Optional control and power. Bluetooth module and remote, pole mounted on/off switch, and a DC output for add on devices.
Technical
(1) Power and delivered lumens depend on location; output is programmed to suit each project. (2) Advanced Power Scaling holds a preset brightness through the night and reduces LED power to a safe minimum only if the battery will not last until morning. (3) Aspire luminaire lumens shown for the T3 optic at 4000K; other optics and colour temperatures vary, and IES files are available on request.
