Description
Aspire 600-ES solar energy storage system
The Aspire 600-ES is built for higher loads and exposed sites where a grid connection is too costly or impractical. Twin 300 Wp monocrystalline panels (600 Wp total) charge scalable LiFePO4 storage on a tapered octagonal, hot dip galvanised steel pole.
It is the Aspire 600 platform without the luminaire and LED arm: solar capture and battery storage only. Three to five 48 Ah modules (3,686 Wh to 6,144 Wh) sit secured inside the pole, above the vehicle impact zone, and the dual battery management system switches off automatically in an impact.
Poles come in 9 m and 10.5 m on slip base foundations, with fixed base available, and are cyclone rated to Wind Region C (239 km/h). Options include a DC output for add on devices, a Bluetooth module for setup and diagnostics, and a pole mounted on/off switch. Each system carries a 5 year complete unit warranty.
Key Features
600 Wp solar capture. Twin 300 Wp monocrystalline panels, with stainless steel bird guards and optional panel guards.
Scalable LiFePO4 storage. 3 / 4 / 5 × 48 Ah modules of 1,229 Wh, rated for 4,000 – 6,000 cycles.
Cyclone rated. Engineered for extreme wind loads and rated to Wind Region C (239 km/h).
Secure in pole storage. Batteries sit inside the pole above the impact zone, with dual padlock plate and door locks.
Roadway poles. 9 m or 10.5 m, tapered octagonal and hot dip galvanised inside and out, on slip base or fixed base foundations.
Optional power and control. DC output for add on devices, Bluetooth module and remote, and a pole mounted on/off switch.
Add lighting later. Fit an Aspire luminaire and it becomes an Aspire 600 street light.
Technical
(1) Autonomy and available capacity depend on location, load and configuration. (2) Controller rating only. Usable output depends on the number of battery modules, the autonomy required and whether the panel can recharge the battery at that load.
