GFS-200 solar street light
Lake Albert solar street lighting Wagga Wagga NSWSolar street lighting Wagga Wagga NSWSolar powered street lighting - Wagga NSWsolar street lights Tweed Coastsolar street lights Pt. Piriesolar street lights GFS-200 Mt. Compasssolar street lights GFS-200 Mt. Compasssolar street lighting GFS-200 Mt. Compasssolar street light GFS-200 street light Katherine NTsolar street lights for illuminating streets Katherine NTSolar street lights flood resistance - Hewett SASolar street lighting flood rated design - Hewett SASolar street lighting - Hewett SASolar powered street lighting - Hewett SAsolar powered basketball court lighting - Hewett SA452solar street light on a roadsolar powered street light - Hewett SAconcrete-block-200-websolar street lights at MoombaSolar park lighting at night Katherine NTsolar park lighting Katherine NTsolar street lighting coastal install tweed heads holiday parks

GFS-200 Solar Street Light

6m Cyclone Rated Solar Street Light

GFS-200 Solar Street Lights are the most reliable, robust, virtually unbreakable Solar Street Light on the market. The GFS-200 is consistently chosen by numerous councils across Australia due to its modern, in-obtrusive appeal. Ideal anywhere from remote outback Australia to inner city suburbia. The GFS-200 series is perfect for pathways, roadways or car parks wherever performance and reliability is key.

Product Description



  • 24V DC operation – meaning NO need for electricians to install or repair this system
  • Simple footing design (650 diameter hole)
  • Colour coded quick release wiring system for simple installation no screwdrivers required
  • No photo sensor (day night switch) which is 90% of failures in street lights.
  • No underground services required (No electrical power needed, our solar street light is fully self sufficient for power up to 14 hours a day)
  • All electronics and batteries are located above ground level (keeps reliability high and servicing easy)
  • Maintenance does NOT require pole to be lowered
  • High vandal resistance (heavy duty guard on back of solar panel, and poly-carbonate lens on light for high rock resistance



  • 30W and 60W Solar Street Lights available
  • Zero Maintenance System
  • DIY Installation – Low Voltage 24VDC system


  • LED – High strength Poly-carbonate + Aluminium
  • Solar Panel – Impact resistant solar panel with stone guard
  • Battery Storage – 10mm plate steel with recessed security screws
  • Advanced LED Compensation Technology – Compensates for broken LED chips if damaged by impact


  • IP65 with complete unit able to withstand full immersion
  • IP68 waterproof connectors
  • Fully Galvanised 3-16mm thick steel,
  • Re-enforced metalwork w/stainless fixings
  • Ideal in high winds and cyclone rated areas
  • Underground cage footings as part of kit to Australian standards
  • All nuts, bolts washers, Serial number plate, installation manual & security key are supplied in durable transport kit


  • 205W Mono-crystalline with toughened glass and re-enforced frame, tuned for optimum low light and winter performance


  • Advanced charging system measures ambient and battery temperature; Varies the charge current, increasing battery life expectancy by up to 4 X even in desert or tropical environments
  • Over discharge, short circuit, reverse polarity protection
  • 2 x Sealed high quality GEL AGM 75Ah batteries (150Ah) With water-proof connectors (*7-10 years expected life)


  • Dusk till Dawn automatic operation with 5-6 days battery backup (30W unit)
  • Designed to charge effectively, even in overcast / rainy locations
  • Up to 14 hour a night operation in most weather conditions
  • Proven performance in tropical, desert, beachfront and wet locations

LED (30W & 60W)

  • 28 x CREE USA made LED in 2 x 14 banks
  • Maximum Efficacy 30W-3900lm 60W-7800lm
  • Light Efficiency <100Lm/W
  • Quick release waterproof IP-68 connector (no wiring required)
  • Roadway, floodlight or combination lenses available
  • Easily Adjustable LED angle to adjust light throw / spill light direction
  • Inbuilt LED driver in base of pole


  • 3.1  P1-P12, AS60598 Australian Certified LED
  • AS1214, IEC61347,AS60598,AS1170, AS4600, AS4680,AS3600, AS4671
  • Location specific AS1158.3.1 certifications available
  • Typical spacing 40-50m
  • Australian Certified engineering reports for wind regions A-C in Australia
    *Region A, Importance level 1 wind case A1,A3,A5,A7,A9, 174KM/hr up to Category 4 winds
    *Region B  Importance level 1 wind case B1,B3,B5,B7,B9 174KM/hr up to Category 4 winds
    *Region C Importance level 1  Wind case C9, Category 4 winds 174KM/hr


  • Total height 6.13M
  • LED height 5.3M on 1.2M outrigger
  • Hole dimensions 650mm x 1100mm


  • Standard – Dusk till Dawn Auto On/OFF
  • Full brightness (30W unit only)
  • Programmable ON_OFF  1-14 hours
  • + 5-100% dimming
  • 1-4 hours before Dusk ON auto sensing
  • 5-100% dimming in any program modes



You may also like…